“2Tooly-C” The Arduino Rover Buddy

A perfect little Rover for student robotics projects. It uses an Arduino Uno, A motor driver, A battery pack and the popular Solarbotics GM8 Motors and wheels. Our own wheels and all other parts required are included (including Pseudo-Caster, 25mm).

Add LED (5mm) headlight eyes and route the wiring through the provided openings and grooves to make a slick little robot rover.

Check back often for new products designed for this rover!

Try our other 60mm diameter wheels for success over a wide range of terrain. See below for more model details about this genuine part.

Product Description

Model type: Multiple part assembly

STLhive 3D printing Product Feature/Benefits:

  • Print orientation (As shown) is intended to maximise part strength but may require more support material. Reorientation of the part may result in less required support material but may dangerously weaken the part resulting in the part breaking while in use.
  • This is an original STLhive design. It is specifically designed for 3D printing and is not available from anywhere other than

Additional items required:

  • Screw, Pan-Head, No.8, 5/8″ Long. (x4)
  • Arduino-Uno, R3 (x1)
  • Arduino Motor-Shield, R3 (x1)
  • Drive Motors, Solarbotics-GM8 (x2)
  • Drive Wheels, Solarbotics, 60mm, GM2389 (Optional – Not Reqd.)
  • Screw, Wheel/Arduino-Uno, No.2, 1/4″ Long (x8)
  • Battery Pack, 4-AA (x1)
  • Double Sided Tape (As Reqd – for battery pack)
  • Battery Snap Connector (9V Style) * May be used as switch!
  • Cells, 1.5VDC, AA (x4)
  • LED, 5mm, Colour not specified (x2)

Additional fabrication required:

  • Typical removal of support material if Reqd.
  • Drill printed holes to full internal diameter if Reqd.

Purchasing / Downloading:

  • You have 24 hours to download your parts after purchase.
  • When you buy this part, you get “.STL” files in a “Zipped” folder (For Windows).


  • STLhive’s recommended printing suggestions are determined based upon the part’s usage. Safety is out main concern.
  • Alternate orientations may provide prints that use less support material but you do so at your own risk. We try whenever possible to orient the grain structure to maximize part strength.
  • This part is intended to be printed using high quality printers; and is modeled with great attention to detail. Printing quality is determined by the printer you are using, your printer set-up and by the type and quality of material used.
  • Filament based printers (like Makerbot and RepRap) may struggle to provide a part that is easily freed from support material.


  • Don’t copy our stuff please! – We own the intellectual rights to all the content on our website because we created it!
  • We would ask that you don’t share this part with your friends; we have priced it so that it is less painful to purchase our parts than it is to share them.
  • If you are the naughty-type that shares files without permission (no you don’t have permission!) could you please give us a “shout-out” in return? Thanks!
  • Our parts are not to be sold on other websites – please inform us of any such activity!


There are no reviews yet, would you like to submit yours?

Be the first to review “"2Tooly-C" The Arduino Rover Buddy”

You must be logged in to post a comment.