Free!

Ruffty-Tuffty Case, Samsung, S7-Galaxy, SM-G930W8

Intended for use with the SAMSUNG Galaxy S7 (SM-G930W8 – not the incendiary Note7) for outdoor activities. Product features a thick exterior case that is designed to take serious impact. If broken or damaged another should be printed to ensure continued protection (similar philosophy to a bicycle helmet), The rear of the case is designed to accept a magnet from the Steelie® Mobile Device Mounts (see link below).

http://www.leevalley.com/en/garden/page.aspx?p=72086&cat=2,42194,72101

This case was designed to solve three problems;

  1. Cost”  Typical consumer models are very overpriced. Our case cost 75 cents to print. and 30 cents for the screws (CAD). 65g of Matl. Reqd with supports (Approx.).
  2. Crash Survival”  Typical consumer models are soft and thin and don’t prevent damage to the phone to a great extent…. Ours is a bit better.
  3. Visibility” Typical phone cases are discreet and slick in appearance (good for looking cool). Try printing your own you can using horrid, bright colours to make it easy to find. Sometimes finding phones is hard in the snow, grass and in dark conditions. The example is printed in white as a compromise between slick and visible.
  4. Easy to hold” for slippery wet conditions, or for those with small or weak hands (children and people with dexterity problems). this phone is waterproof so slippery conditions are likely if used to its full potential.

This case is not designed with aesthetics in mind; the case is simply supposed to do a utilitarian job. We printed ours to have maximum texture (printed FAST).

See below for more model details about this genuine STLhive.com part.

Product Description

Finished Dimensions (W,D,H mm): 87, 16, 163 (based on suggested print orientation)

Model type: Multiple part assembly

STLhive 3D printing Product Feature/Benefits:

  • Print orientation (As shown) is intended to maximise part strength but may require more support material. Reorientation of the part may result in less required support material but may dangerously weaken the part resulting in the part breaking while in use.
  • This is an original STLhive design. It is specifically designed for 3D printing and is not available from anywhere other than STLhive.com.

Additional items required:

  • To assemble you will need 2 screws not included (#6, Pan-Head, 3/4in Long – or Equivalent). Note: Use a screw that is rust-resistant.

Additional fabrication required:

  • Typical removal of support material if Reqd.
  • Drill printed holes to full internal diameter if Reqd.

Purchasing / Downloading:

  • You have 24 hours to download your parts after purchase.
  • When you buy this part, you get “.STL” files in a “Zipped” folder (For Windows).

Printing: 

  • STLhive’s recommended printing suggestions are determined based upon the part’s usage. Safety is out main concern.
  • Alternate orientations may provide prints that use less support material but you do so at your own risk. We try whenever possible to orient the grain structure to maximize part strength.
  • This part is intended to be printed using high quality printers; and is modeled with great attention to detail. Printing quality is determined by the printer you are using, your printer set-up and by the type and quality of material used.
  • Filament based printers (like Makerbot and RepRap) may struggle to provide a part that is easily freed from support material.

Copyright:

  • Don’t copy our stuff please! – We own the intellectual rights to all the content on our website because we created it!
  • We would ask that you don’t share this part with your friends; we have priced it so that it is less painful to purchase our parts than it is to share them.
  • If you are the naughty-type that shares files without permission (no you don’t have permission!) could you please give us a “shout-out” in return? Thanks!
  • Our parts are not to be sold on other websites – please inform us of any such activity!

Reviews

There are no reviews yet, would you like to submit yours?

Be the first to review “Ruffty-Tuffty Case, Samsung, S7-Galaxy, SM-G930W8”

You must be logged in to post a comment.