While most 3D printed parts are not fit for actual aviation use when parts are made from PLA; we think there are still lots of aviation related items to be made. As soon as we can print like the big-boys at home i.e. from Titanium and austenitic nickel-chromium-based superalloys we will be very pleased with this industry! Until then we can make lots of aviation related stuff. Send us your requests please!

  • $4.75

    ACE-One, Propellers, 6″ x 5″, 4mm Shaft<

    A pair of attractive/efficient propellers intended for small projects. Products feature highly efficient airfoil sections for low Reynolds numbers (small propellers). Aggressive pitch moves large amounts of air. Designed to fit on standard 4mm shaft motors (CW and CCW). Intended for use on Multi-Rotors, Airplanes, Airboats, Hovercraft or Blimps. See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • Free!

    Ducted Fan Unit, 3″ (MT1306)<

    This small Ducted-fan assembly is to be used with the following motor and fan: M: http://www.rctigermotor.com/html/2013/Professional_0912/41.html F: http://www.stlhive.com/shop/aviation/fan-3-x-2-4-4mm-shaft-mt1306/ This complete design is intended to be used with Hovercraft and Airboats. It is suitable for aircraft use (Multirotor, Airplanes and Blimps) but it is probably a little too heavy. The Fan is designed with strength and efficiency in mind. The duct unit is deigned to snap together to save weight. Ducted fan units can be expensive - this is a great cost saving way to have lots! The main duct component is hollow to allow routing of wires. See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • Free!

    Fan, 3″ x 2.4″, 4mm Shaft (MT1306)<

    This small Ducted fan is to be used with the following motor (MT-1306): http: // http://www.rctigermotor.com/html/2013/Professional_0912/41.html Use this fan with the STLhive Ducted Fan unit or use this propeller by its self. Suitable for aircraft use (Multirotor, Airplanes and Blimps) but it is probably a little too heavy. The Fan is made with strength in mind. We have designed a duct unit specifically for this fan and a small high-performance motor (shown in renderings). See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • Free!

    LUNA 1.0, 250 FPV Racer<

    The LUNA is intended to be flown by entry level FPV racers who like 3D printing, and high school students who want to convince their teacher that FPV racing is educational (IT IS!). This design has more instructions than usual for FPV students and beginners (PDF information package in download). Product features light weight and fast printing frame (and FREE), Product benefits include easy to mount hardware and low mass (for 3D printed parts), The ESCs are mounted externally and as a result provide good cooling with flexibility of choice. The battery is mounted above the centre of mass for the flying structure which offers a degree of self correcting and choice. The battery is easily mounted with a Velcro strap. The custom made wiring harness offers a space saving and performance enhancement (you make it). The soldering experience is good for students and newcomers. Some features like the mounting of the VTX and the flight controller are very specific and only work if you use the equipment specified. We have chosen the purchased components with great care and think we can offer good performance/value We are happy with the design and welcome student/customer alterations. please contact us accordingly. All of the components we use are listed in the information document contained in the download. Please let us know what you think of this design and help us improve it with customer feedback - without our customers we are nothing! Thank you all for your continued and helpful comments - you: our customers are the BEST! P.S. thank you to all of our customers who provide us with useful personal information (we don't share it with anyone). You help us understand how to serve you best and how we can be the best. This design was not intended to be free initially - but you folks are the best - so it's a present! See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • $4.75

    Propeller, 105 x 56, 2mm Shaft (3VDC<

    An attractive/efficient propeller/spinner intended for small projects. This product is based on the Pipistrel  Green Flight Challenge (NASA). This version has 3 highly efficient blades that twist as propeller load increases and decreases pitch angle. The Pipistrel design acts a little like a variable pitch propeller with the simplicity of a fixed-pitch propeller. We have taken liberties here - trying only to capture the spirit of the award winning design. This propeller is designed to fit on small hobby motors to be used as a fan for airboats, hovercraft or blimps. See below for more model details about this genuine STLhive.com part. Also See: http://www.aopa.org/News-and-Video/All-News/2011/October/5/Pipistrel-wins-NASAs-Green-Flight-Challenge
    view Add to cart
  • Free!

    Propeller, 130 x 75, 2mm Shaft (3VDC)<

    An attractive/efficient propeller intended for small projects. Product features highly efficient airfoil sections for low Reynolds numbers (small propellers). Aggressive pitch moves large amounts of air. Designed to fit on small hobby motors to be used as a fan for airboats, hovercraft or blimps. This Propeller is ideal for ducted fan use. See below for more model details about this genuine STLhive.com part. See Video: https://youtu.be/ve9AgQGHjMk
    view Add to cart