This category is added to products in other segments like Aviation and Boating to make it easier to find model making related products in the overall product listing. Do you need anything we don’t have? Request it!

  • Free!

    Dreadnought, Toy Submarine, Pool & Beach<

    Congrats to the Royal Navy for naming their new Submarines after the Dreadnought. If you don't know why that is cool - google it (Battle of Trafalgar)! This design is intended for pool or beach use, Product features include: 3 part construction of main hull. sized for a Lulzbot Mini-printer. Each end of the hull parts is specially designed to hold onto heated beds but not too much! the parts are easily joined with hot glue. The sub can be printed hollow and gravel or marbles can be added as ballast. Print the hull solid and add buoyancy to achieve the best performance for your kiddies. We printed it hollow and added ballast in the form of beach sand. after it settles it makes good ballast and can be shaken out to make it more buoyant. Gravel works best because it will not escape through the 3mm vent holes. A screw cap makes adding ballast easy and allows for faster drainage. Tie a string through the cap and the hull to keep it from being lost. We suggest printing this from vibrant materials so that it is easier to see in the water. Diving into this thing would hurt - loosing a black sub at the beach would be very easy. The rear fins could hurt little feet if dropped on them - keep this in mind especially when the submarine is full of ballast. See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • Free!

    Ducted Fan Unit, 3″ (MT1306)<

    This small Ducted-fan assembly is to be used with the following motor and fan: M: http://www.rctigermotor.com/html/2013/Professional_0912/41.html F: http://www.stlhive.com/shop/aviation/fan-3-x-2-4-4mm-shaft-mt1306/ This complete design is intended to be used with Hovercraft and Airboats. It is suitable for aircraft use (Multirotor, Airplanes and Blimps) but it is probably a little too heavy. The Fan is designed with strength and efficiency in mind. The duct unit is deigned to snap together to save weight. Ducted fan units can be expensive - this is a great cost saving way to have lots! The main duct component is hollow to allow routing of wires. See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • Free!

    LUNA 1.0, 250 FPV Racer<

    The LUNA is intended to be flown by entry level FPV racers who like 3D printing, and high school students who want to convince their teacher that FPV racing is educational (IT IS!). This design has more instructions than usual for FPV students and beginners (PDF information package in download). Product features light weight and fast printing frame (and FREE), Product benefits include easy to mount hardware and low mass (for 3D printed parts), The ESCs are mounted externally and as a result provide good cooling with flexibility of choice. The battery is mounted above the centre of mass for the flying structure which offers a degree of self correcting and choice. The battery is easily mounted with a Velcro strap. The custom made wiring harness offers a space saving and performance enhancement (you make it). The soldering experience is good for students and newcomers. Some features like the mounting of the VTX and the flight controller are very specific and only work if you use the equipment specified. We have chosen the purchased components with great care and think we can offer good performance/value We are happy with the design and welcome student/customer alterations. please contact us accordingly. All of the components we use are listed in the information document contained in the download. Please let us know what you think of this design and help us improve it with customer feedback - without our customers we are nothing! Thank you all for your continued and helpful comments - you: our customers are the BEST! P.S. thank you to all of our customers who provide us with useful personal information (we don't share it with anyone). You help us understand how to serve you best and how we can be the best. This design was not intended to be free initially - but you folks are the best - so it's a present! See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • Free!

    Prop-er-Balancer, 6″ Diameter Prop/Fan<

    Compatible with all STLhive.com Propellers and parts needing static balancing. Intended to replace smaller balancers that don't allow full rotation of the prop. Product features the use of magnets and other hardware from: HobbyKing™ Universal Propeller Balancer, For T Style and Std Propellers https://hobbyking.com/en_us/hobbykingtm-universal-propeller-balancer-for-t-style-and-std-propellers.html See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • $4.75

    Propeller, 105 x 56, 2mm Shaft (3VDC<

    An attractive/efficient propeller/spinner intended for small projects. This product is based on the Pipistrel  Green Flight Challenge (NASA). This version has 3 highly efficient blades that twist as propeller load increases and decreases pitch angle. The Pipistrel design acts a little like a variable pitch propeller with the simplicity of a fixed-pitch propeller. We have taken liberties here - trying only to capture the spirit of the award winning design. This propeller is designed to fit on small hobby motors to be used as a fan for airboats, hovercraft or blimps. See below for more model details about this genuine STLhive.com part. Also See: http://www.aopa.org/News-and-Video/All-News/2011/October/5/Pipistrel-wins-NASAs-Green-Flight-Challenge
    view Add to cart
  • Free!

    Wiring Harness Jig, Power Distribution, FPV<

    Intended to be used with STLhive.com Quad-Copter designs. Product features a quick to print, and easy to use design. This jig allows single hands free soldering. If too much heat is applied it is safe to assume the Jig will melt. Modifications can be made as customers requests with sketches and dimensions sent to us. This Jig gets the job done and leaves some room for improvement and innovation as the need should arise. See below for more model details about this genuine STLhive.com part.
    view Add to cart