Some of our staff are very obsessed with the new multi-rotor products on the market. Members of our staff are very busy researching our next Quad-Copter, Tri-Copter or other design.

Check out the following YouTube Channel:
www.youtube.com/channel/UCp1vASX-fg959vRc1xowqpw

Just because we notice and appreciate people who go the extra mile to help others we would like to promote a friend of ours. He has helped us avoid lots of common mistakes. Do you need anything we don’t have? Request it! Safe Flying!

  • $4.75

    ACE-One, Propellers, 6″ x 5″, 4mm Shaft<

    A pair of attractive/efficient propellers intended for small projects. Products feature highly efficient airfoil sections for low Reynolds numbers (small propellers). Aggressive pitch moves large amounts of air. Designed to fit on standard 4mm shaft motors (CW and CCW). Intended for use on Multi-Rotors, Airplanes, Airboats, Hovercraft or Blimps. See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • Free!

    Ducted Fan Unit, 3″ (MT1306)<

    This small Ducted-fan assembly is to be used with the following motor and fan: M: http://www.rctigermotor.com/html/2013/Professional_0912/41.html F: http://www.stlhive.com/shop/aviation/fan-3-x-2-4-4mm-shaft-mt1306/ This complete design is intended to be used with Hovercraft and Airboats. It is suitable for aircraft use (Multirotor, Airplanes and Blimps) but it is probably a little too heavy. The Fan is designed with strength and efficiency in mind. The duct unit is deigned to snap together to save weight. Ducted fan units can be expensive - this is a great cost saving way to have lots! The main duct component is hollow to allow routing of wires. See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • Free!

    Fan, 3″ x 2.4″, 4mm Shaft (MT1306)<

    This small Ducted fan is to be used with the following motor (MT-1306): http: // http://www.rctigermotor.com/html/2013/Professional_0912/41.html Use this fan with the STLhive Ducted Fan unit or use this propeller by its self. Suitable for aircraft use (Multirotor, Airplanes and Blimps) but it is probably a little too heavy. The Fan is made with strength in mind. We have designed a duct unit specifically for this fan and a small high-performance motor (shown in renderings). See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • Free!

    LUNA 1.0, 250 FPV Racer<

    The LUNA is intended to be flown by entry level FPV racers who like 3D printing, and high school students who want to convince their teacher that FPV racing is educational (IT IS!). This design has more instructions than usual for FPV students and beginners (PDF information package in download). Product features light weight and fast printing frame (and FREE), Product benefits include easy to mount hardware and low mass (for 3D printed parts), The ESCs are mounted externally and as a result provide good cooling with flexibility of choice. The battery is mounted above the centre of mass for the flying structure which offers a degree of self correcting and choice. The battery is easily mounted with a Velcro strap. The custom made wiring harness offers a space saving and performance enhancement (you make it). The soldering experience is good for students and newcomers. Some features like the mounting of the VTX and the flight controller are very specific and only work if you use the equipment specified. We have chosen the purchased components with great care and think we can offer good performance/value We are happy with the design and welcome student/customer alterations. please contact us accordingly. All of the components we use are listed in the information document contained in the download. Please let us know what you think of this design and help us improve it with customer feedback - without our customers we are nothing! Thank you all for your continued and helpful comments - you: our customers are the BEST! P.S. thank you to all of our customers who provide us with useful personal information (we don't share it with anyone). You help us understand how to serve you best and how we can be the best. This design was not intended to be free initially - but you folks are the best - so it's a present! See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • Free!

    Meteor FPV, Quadcopter, M1-250<

    Intended to be a cruiser for hobby enthusiasts who want to fly for practice, or for those who want something different to fly. This product features a durable design. Best printed from PETG or a strong light material. A clean exterior is achieved with internal wiring and battery. Good aerodynamics offset the heavier weight of 3D-printed parts (as opposed to carbon fibre plate construction). Product benefits include crash protected electronics and an original design. This design is very attractive as compared to the popular carbon-sheet designs. Camera angle is adjustable from flat for beginners to +30 degrees for serious racers.
    view Add to cart
  • Free!

    Prop-er-Balancer, 6″ Diameter Prop/Fan<

    Compatible with all STLhive.com Propellers and parts needing static balancing. Intended to replace smaller balancers that don't allow full rotation of the prop. Product features the use of magnets and other hardware from: HobbyKing™ Universal Propeller Balancer, For T Style and Std Propellers https://hobbyking.com/en_us/hobbykingtm-universal-propeller-balancer-for-t-style-and-std-propellers.html See below for more model details about this genuine STLhive.com part.
    view Add to cart
  • $4.75

    Propeller, 105 x 56, 2mm Shaft (3VDC<

    An attractive/efficient propeller/spinner intended for small projects. This product is based on the Pipistrel  Green Flight Challenge (NASA). This version has 3 highly efficient blades that twist as propeller load increases and decreases pitch angle. The Pipistrel design acts a little like a variable pitch propeller with the simplicity of a fixed-pitch propeller. We have taken liberties here - trying only to capture the spirit of the award winning design. This propeller is designed to fit on small hobby motors to be used as a fan for airboats, hovercraft or blimps. See below for more model details about this genuine STLhive.com part. Also See: http://www.aopa.org/News-and-Video/All-News/2011/October/5/Pipistrel-wins-NASAs-Green-Flight-Challenge
    view Add to cart
  • Free!

    Propeller, 130 x 75, 2mm Shaft (3VDC)<

    An attractive/efficient propeller intended for small projects. Product features highly efficient airfoil sections for low Reynolds numbers (small propellers). Aggressive pitch moves large amounts of air. Designed to fit on small hobby motors to be used as a fan for airboats, hovercraft or blimps. This Propeller is ideal for ducted fan use. See below for more model details about this genuine STLhive.com part. See Video: https://youtu.be/ve9AgQGHjMk
    view Add to cart
  • Free!

    Wiring Harness Jig, Power Distribution, FPV<

    Intended to be used with STLhive.com Quad-Copter designs. Product features a quick to print, and easy to use design. This jig allows single hands free soldering. If too much heat is applied it is safe to assume the Jig will melt. Modifications can be made as customers requests with sketches and dimensions sent to us. This Jig gets the job done and leaves some room for improvement and innovation as the need should arise. See below for more model details about this genuine STLhive.com part.
    view Add to cart