Moon Wheels, Easy-Print, EV3NXT, 35mm x 90mm

Designed for Powder (Dust, Snow and possibly Cheese)!

These wheels are designed to ride smoothly on soft surfaces like fine-sand (dust),  soft earth and hard packed snow. The design is perfect for indoor carpet and grass too. We have not actually tried the wheel on cheese (will you?)!

Intended to be used with Lego Mindstorms and Technics kits, Product features easy print geometry that reduces the need for support material. This benefits the builder by reducing time required removing the support material and producing a smoother/stronger part. Reducing the support material is achieved by printing the finished wheel in two parts to be assembled with No.8 Pan head screws. We have left some of the screw showing to add a bit of style to the part.

See below for more model details about this genuine part.

Product Description

Model type:  Multiple part assembly (2 parts per wheel).

STLhive 3D printing Product Feature/Benefits:

  • Attractive and Tough looking.
  • Screws make assembly easy and strong.
  • Little support Matl. Reqd. due to easy-print design.
  • Versatile tread pattern allows top performance on various surfaces with good wear properties.
  • Print orientation (As shown) is intended to maximise part strength but may require more support material. Reorientation of the part may result in less required support material but may dangerously weaken the part resulting in the part breaking while in use.
  • This is an original STLhive design. It is specifically designed for 3D printing and is not available from anywhere other than

Additional items required:

  • To assemble you will need 5 screws not included (#8, Pan-Head, 1in Long – or Equivalent).

Additional fabrication required:

  • Typical removal of support material if Reqd.
  • Drill printed holes to full internal diameter if Reqd.

Purchasing / Downloading:

  • You have 24 hours to download your parts after purchase.
  • When you buy this part, you get “.STL” files in a “Zipped” folder (For Windows).


  • STLhive’s recommended printing suggestions are determined based upon the part’s usage. Safety is out main concern.
  • Alternate orientations may provide prints that use less support material but you do so at your own risk. We try whenever possible to orient the grain structure to maximize part strength.
  • This part is intended to be printed using high quality printers; and is modeled with great attention to detail. Printing quality is determined by the printer you are using, your printer set-up and by the type and quality of material used.
  • Filament based printers (like Makerbot and RepRap) may struggle to provide a part that is easily freed from support material.


  • Don’t copy our stuff please! – We own the intellectual rights to all the content on our website because we created it!
  • We would ask that you don’t share this part with your friends; we have priced it so that it is less painful to purchase our parts than it is to share them.
  • If you are the naughty-type that shares files without permission (no you don’t have permission!) could you please give us a “shout-out” in return? Thanks!
  • Our parts are not to be sold on other websites – please inform us of any such activity!


There are no reviews yet, would you like to submit yours?

Be the first to review “Moon Wheels, Easy-Print, EV3NXT, 35mm x 90mm”

You must be logged in to post a comment.